Tire Resistant Flooring System for Niemann’s Auto Touch in Northern California
by Michelle
- November 19th, 2020 /
- Epoxy Coat,Project Profile
Niemann’s Auto Touch in Placerville, California, is a one-stop-shop, serving El Dorado & Amador County for over 20 years. They moved into a new detail shop space and needed a durable system to withstand the vehicular traffic that the floor would receive. When the floor was ready to be coated, the Niemann’s reached out to Paul Koury, Westcoat CEO, directly as they’ve known each other for many years.
NorCal rep Chris Tapia was brought in to find an applicator right for the job. After recommending Matt Bowen of Prep Concrete they got to work.
Wanting to avoid any moisture issues the concrete was prepped and EC-15 MVB, moisture vapor barrier, was installed to mitigate moisture. For tire resistance, two coats of EC-102 Polyaspartic Topcoat in Cape Cod Gray was installed to build up the floor.
The Finished Results
Advantages
EC-102 Polyaspartic is designed to be used as a topcoat for many of the Westcoat Epoxy Systems. It provides a non-yellowing, high gloss, fast drying, medium-build finish with outstanding wear resistance. EC-102 on industrial floors, garage floors, decorative floors, restaurant floors, food processing facilities, automotive service areas, airplane hangars, commercial pool decks or where a medium build and high sheen is desired.
USDA/FDA Compliant • Medium Viscosity • Chemical Resistant • UV Resistant • Low VOC Content • Fast-Drying • Resistant to Tire Staining
EC-15 Moisture Vapor Barrier is a uniquely formulated, two component, 100% solids, zero VOC epoxy that is moisture tolerant and diluent free. Designed to be applied directly over properly prepared concrete substrates and works to reduce the MVER (Moisture Vapor Emission Rate) of up to 15 lbs/24 hours * 1000 square feet. Can be used with most Westcoat Systems.
Easy-to-apply • One Coat Application • Low VOC • Excellent Adhesion • Economical Solution • Compatible with Most Westcoat Flooring Systems • Resistant to High pH levels • Suitable for Slabs with MVER up to 15 Pounds and RH up to 95%
Do you have a Warehouse Floor that needs a hardworking coating?
To learn more about our Epoxy Coat systems visit us at https://www.westcoat.com/system-category/epoxy-coat/ or contact us at (800) 250-4519 to speak to a local representative in your area.